Fusion Splicer (KL-280)

Features
-Core to core alignment by PAS technology
( PAS: Profile Alignment System)
-Fiber core can be display clearly
-SingleX or Y view and X & Y view simultaneously
-Auto detect cleaved endface fault
-Display fiber cleaved and offset angle
-Display core and clad offset
-5.6 inch TFT color LCD monitor with clear digital image display
-USB & VGA interface
Software upgrade via USB interface

Specefications
Model KL-280
-Applicable fibers: SM (ITU-T G. 652), MM (ITU-T G. 651), DS (ITU-T G. 653), NZDS (ITU-T G. 655)
-Fiber cleaved length: 8~16mm(Coating diameter: 250 μ M) 16mm(Coating diameter: 250 ~ 1000μ M)
-Fiber diameter: Cladding diameter: 80 ~150μ M; Coating diameter: 100~ 1000μ M
-Fiber Count: Single
-Fiber aligning method: Core or clad aligning
-Image processing method: Digital
-Actual average splice loss: 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
-Splicing time: Typical 9 sec, with standard SM fiber
-Splicing mode: 53(templet), 40(user)
-Splice loss estimate: More accurate
-Return loss >60dB
-Storage of splice result: 4000 results, 20 parameter per result
-Fiber display and magnification: 300X(X or Y view), 150X(X and Y view)
-Tube heating time: Typical 30 sec
-Tube heating mode: 9(templet), 24(user)
-Tube heating temperature: Can be adjusted
-Applicable Protection sleeve length: 60mm, 40mm and a series of micro sleeves
-Tension test: 2N
-Electrode life: 2500
-No. Of splice/heating with battery: Typical 150 cycles (splice/tube heat) with inner Li-battery
-Display screen: 5.6 TFT inch color LCD monitor
-Image change over: The fiber image is turned upside down
-Terminals: USB 1.1 and VGA

Operating condition: 0 ~ 5000m above sea level, 0 ~ 95%RH and -10~50º C, respectively, Max. Wind velocity of 15m/s
Power supply: AC 100-240V with AC adapter; Inner Li-battery(8000mAH)
Dimensions: 150mm(L) x150mm (W) x150mm (H)
Weight: 2.7 Kg excluding battery, 3.2 Kg including battery